LANCOM LX-6400 (WW)

HAN: 61822 |
Item number: 3017584 |
Available now! |
15 - 17 workdays
561,11 €

including 19% VAT.

LANCOM LX-6400 (WW)
Hersteller-Artikelnummer: 61822 
Type: Dual Radio Access Point (Indoor)
Form factor: External
WLAN operating modes: LANCOM Management Cloud , Stand-alone or WLAN-Controller 
Simultaneous WLAN Clients: Bis zu 511 Clients
Service- / LMC categorie: S /A
Frequency band: 2,4 - 5 GHz 
Data transfer rate: Up to 2400 MBit/s (with Wi-Fi 6 - IEEE 802.11ax, 4x4 MIMO, 40 MHz-/80 MHz channels, MU-MIMO, QAM-1024)
Spread-Spectrum-Methods:
Orthogonal Frequency Division Multiple Access (OFDMA)
Power supply : IEEE 802.3at PoE 
Power supply unit: 1 x External plug-in power supply unit (230V)
Interfaces: 1 x 2.5 GBase-T (PoE+) - RJ-45 ¦ 1 x 1000Base-T - RJ-45 ¦ 1 x USB 3.0 - Type A
Integrated antenna: Radio module 1 and 2 each use four integrated antennas (8 in total)
Multi-SSID:
A total of 32 independent WLAN networks
Encryption algorithm: TLS, PEAP, TTLS, AES-CCMP, WPA2-PSK, WPA2-Enterprise, WEP, LEPS-U
Operating system provided: LCOS LX 5.00
Language: German, English
*Note: without power supplies

561,11 €

including 19% VAT.


  • request conditions and save up to 40% on your project

  • get your offer in 4 hours

  • personal consultation

Very polite contact, professional consultation and faire pricing.

M. K. TrustedShop rating from 11.12.2019

Here is a summary of the most important information about our article LANCOM LX-6400 (WW) 61822



Dual Concurrent WLAN with up to 2400 MBit/s
The LANCOM LX-6400 offers WLAN in the Wi-Fi 6 standard (IEEE 802.11ax) and can supply both clients in the 2.4 GHz frequency band and modern terminal devices in the 5 GHz band with fast WLAN. The Wi-Fi 6 technology with 80 MHz channel width and higher modulation density with QAM-1024 enables transmission rates of up to 2400 MBit/s in 5 GHz and parallel up to 1200 MBit/s in 2.4 GHz.

4x4 multi-user MIMO in the downlink and uplink
Multi-User MIMO (MU-MIMO for short) allows all available spatial streams of the LANCOM LX-6400 to be distributed to several different clients simultaneously instead of serving them one after the other as was previously the case. This makes efficient use of the available bandwidth and massively reduces delays in the wireless network. With Wi-Fi 6, MU-MIMO can be used not only in the downlink but also in the uplink.

OFDMA - The carpool in the radio field
Orthogonal Frequency Division Multiple Access (OFDMA) divides the frequency range of a WLAN channel into several frequency blocks within a time unit. This results in subchannels (sub-carriers) that can be up to 2 MHz narrow. This means that small data packets such as those expected from IoT devices no longer block the channel of 20, 40 or even 80 MHz width alone. On the other hand, the Wi-Fi 6 access point can combine several subchannels and transport them together. A kind of carpooling that avoids that many cars with only one person blocking the road traffic and instead the streets are emptied by a few cars with several occupants.

160 MHz channel width
The access point can handle channel bandwidths of 20, 40 and 80 MHz (with 4 streams) and 160 MHz (with 2 streams). Terminal devices with two antennas that support 160 MHz reception thus benefit from strong data rates of up to 2,400 Mbits.

Longer battery life thanks to TWT
Until now, smartphones, tablets or notebooks had to be ready to receive at all times in order not to miss any of the data packets that might arrive. This quickly used up the battery charge. Wi-Fi 6 brings a new technology that counteracts power consumption on the client side. Target Wake Time, TWT for short, reduces consumption by letting the access point and client negotiate exactly when the receiver will wake up to hear the transmitter call.

Band Steering
Optimal load distribution in your wireless network thanks to active control of the clients on the less used and more powerful 5 GHz frequency band.

Operation via LANCOM Management Cloud
The LANCOM LX-6400 is extremely user-friendly: Managed via the LANCOM Management Cloud, it is integrated into a holistic, automated network orchestration based on software-defined networking technology.

Operation via WLC is in preparation
Operation of the LANCOM LX-6400 access point via Wireless LAN Controller will follow at the beginning of 2020, or alternatively we would like to point out the possibility of management via the LANCOM Management Cloud.

LANCOM security for wireless networks
With numerous integrated security functions such as IEEE 802.1X, this enterprise access point ensures optimal security in networks. Thus both administrators and employees benefit from professional security policies in the network.

Flexible power supply
The LANCOM LX-6400 can be operated flexibly at any PoE-powered Ethernet port via Power over Ethernet (PoE) in accordance with IEEE 802.3at. Alternatively, the access point can be supplied with power via the supplied power supply unit with various plug adapters (EU, UK, US, AU).

For further questions about the article LANCOM LX-6400 (WW) 61822 contact one of our experienced experts via chat, e-mail or telephone to clarify your questions quickly and easily. We are looking forward to your requests!

Technische Daten:
Produktbeschreibung : LANCOM LX-6400 - Funkbasisstation
Gerätetyp : Funkbasisstation
Formfaktor : Extern
Lokalisierung : Weltweit
Data Link Protocol : IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, IEEE 802.11ax
Frequenzband : 2.4 GHz, 5 GHz
Kapazität : SSIDs gesamt&colon
Michael Sowiecki

Do you have any questions,
or is there anything we can help you with?

Feel free to contact us +49 2234 2508 50 Free Callback Service Request callback

Any questions?

Leave a message, we love to call you back.

Do you have any questions,
or is there anything we can help you with?

Write us an e-mail info@serverhero.de Or use our contact form Contact form

Don't hesitate to contact us. Let us know what we can do for you.

Submit

Other contact options: