LANCOM LX-6402 (EU)

HAN: 61825 |
Item number: 3017586 |
Available now! |
1 - 3 workdays
580,01 €

including 19% VAT.

LANCOM LX-6402 (EU)
Hersteller-Artikelnummer: 61825 
Type: Dual Radio Access Point (Indoor)
Form factor: External
WLAN operating modes: LANCOM Management Cloud , Stand-alone or WLAN-Controller 
Simultaneous WLAN Clients: Bis zu 511 Clients
Service- / LMC categorie: S /A
Frequency band: 2,4 - 5 GHz 
Data transfer rate: Up to 2400 MBit/s (with Wi-Fi 6 - IEEE 802.11ax, 4x4 MIMO, 40 MHz-/80 MHz channels, MU-MIMO, QAM-1024)
Spread-Spectrum-Methods:
Orthogonal Frequency Division Multiple Access (OFDMA)
Power supply : IEEE 802.3at PoE 
Power supply unit: 1 x External plug-in power supply unit (230V)
Interfaces: 1 x 2.5 GBase-T (PoE+) - RJ-45 ¦ 1 x 1000Base-T - RJ-45 ¦ 1 x USB 3.0 - Type A
Antenna: 4 x Externally detachable
Multi-SSID: A total of 32 independent WLAN networks
Encryption algorithm: TLS, PEAP, TTLS, AES-CCMP, WPA2-PSK, WPA2-Enterprise, WEP, LEPS-U
Operating system provided: LCOS LX 5.00
Language: German, English 

580,01 €

including 19% VAT.


  • request conditions and save up to 40% on your project

  • get your offer in 4 hours

  • personal consultation

Very polite contact, professional consultation and faire pricing.

M. K. TrustedShop rating from 11.12.2019

Here is a summary of the most important information about our article LANCOM LX-6402 (EU) 61825



Dual concurrent Wi-Fi with up to 2400 Mbps
The LANCOM LX-6402 offers the Wi-Fi 6 standard (IEEE 802.11ax) for clients in the 2.4- and 5-GHz bands. Wi-Fi 6 technology features an 80-MHz channel width and a higher modulation density with QAM-1024 to achieve transmission rates of up to 2400 Mbps at 5 GHz and simultaneously up to 1200 Mbps at 2.4 GHz.

4x4 Multi-User MIMO for downlinks and uplinks
Multi-user MIMO (MU-MIMO for short) simultaneously distributes all of the available spatial streams of the LANCOM LX-6402 between several different Wave 2 clients, rather than one after the other as was formerly the case. The available bandwidth is used efficiently and delays in the wireless network are substantially reduced. With Wi-Fi 6, MU-MIMO operates not only for the downlink but for the uplink as well.

OFDMA – carpooling in the radio field
Orthogonal Frequency Division Multiple Access (OFDMA) divides the frequency range of a Wi-Fi channel into a number of frequency blocks per unit of time. This creates subcarriers, which can be as narrow as just 2 MHz. Small data packets, so typical of IoT devices, no longer block entire 20-, 40- or even 80-MHz channels all by themselves. On the other hand, the Wi-Fi 6 access point is able to bundle multiple subcarriers. This is bit like carpooling, which stops the traffic being blocked by cars with just one occupant: Instead, the streets are freed up with just a few cars carrying several occupants.

160 MHz channel width
The access point can handle channel bandwidths of 20, 40 and 80 MHz (with 4 streams) and 160 MHz (with 2 streams). The channel width of 160 MHz ensures a data throughput of up to 2400 Mbps on appropriate terminals with two antennas that support the reception of two streams at 160 MHz.

Longer battery life thanks to TWT
Previously, smartphones, tablets and notebooks had to be ready to receive all the time so as not to miss their data packets. This can quickly use up battery charge. Wi-Fi 6 delivers a new technology to counteract power consumption on the client side. Target Wake Time, TWT for short, reduces consumption by allowing the access point and the client to negotiate exactly when the receiver should wake up to hear the sender's call.

Band steering
Optimized load balancing in your Wi-Fi by actively redirecting clients to the less congested and higher performance 5-GHz frequency band.

Operates via the LANCOM Management Cloud
The LANCOM LX-6402 offers unsurpassed user-friendliness: Managed through the LANCOM Management Cloud, it integrates into a holistic, automated network orchestration system based on software-defined networking technology.

Operation via WLC is in preparation
The LANCOM LX-6402 access point is due to operate with WLAN controllers as of early 2020. The alternative for centralized management is the LANCOM Management Cloud.

LANCOM security for wireless networks
With numerous integrated security features such as IEEE 802.1X, this enterprise-class access point provides optimal security for networks. Administrators and employees alike benefit from professional security policies on the network.

Versatile power supply
Thanks to the power supply via power over Ethernet as per IEEE 802.3at, the LANCOM LX-6402 operates at any PoE-powered Ethernet port. Alternatively, the access point operates with a power supply unit supplied with various plug adapters (EU, UK, US, AU).

For further questions about the article LANCOM LX-6402 (EU) 61825 contact one of our experienced experts via chat, e-mail or telephone to clarify your questions quickly and easily. We are looking forward to your requests!

Technische Daten:
Produktbeschreibung : LANCOM LX-6402 - Funkbasisstation
Gerätetyp : Funkbasisstation
Formfaktor : Extern
Lokalisierung : Europa
Data Link Protocol : IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, IEEE 802.11ax
Frequenzband : 2.4 GHz, 5 GHz
Kapazität : SSIDs gesamt&colon
Savas Günes

Do you have any questions,
or is there anything we can help you with?

Feel free to contact us +49 2234 2508 50 Free Callback Service Request callback

Any questions?

Leave a message, we love to call you back.

Do you have any questions,
or is there anything we can help you with?

Write us an e-mail info@serverhero.de Or use our contact form Contact form

Don't hesitate to contact us. Let us know what we can do for you.

Submit

Other contact options: