HAN: 61850 |
Item number: 3017592 |
Available now! |
1 - 3 workdays
1.176,83 €

including 19% VAT.

Manufacturer-SKU: 61850
Type: Fully Managed Gigabit Switches (Layer 3 Lite Switch)
Form factor: Rack mountable (1U)
Service / LMC category: L /C
Interfaces: 12 x 1000Base-T RJ-45 PoE+ ¦ 12 x 100/1000/2.5G RJ-45 PoE+ ¦ 4 x 10Gbit-LAN SFP+ ¦ 1 x console RJ-45 (28 simultaneously usable ports /PoE+ 370W)
Power consumption (max.): 480W
Power supply: Internal (120/230V)
Safety features: IEEE 802.1X, PVE, RADIUS, SSH, SSL, SNMPv3, TACACS+
Virtual interfaces (VLANs): 4096 IDs according to IEEE 802.1q
Network: IPv6 / IPv4 support
Number of fans: 1
Language: German, English
Warranty: 5 years

1.176,83 €

including 19% VAT.

  • request conditions and save up to 40% on your project

  • get your offer in 4 hours

  • personal consultation

Very polite contact, professional consultation and faire pricing.

M. K. TrustedShop rating from 11.12.2019

Here is a summary of the most important information about our article LANCOM GS-3528XP 61850

High performance on 28 ports
The LANCOM GS-3528XP is equipped with 12x 2.5 Gigabit Ethernet ports, 12x Gigabit Ethernet ports and 4 SFP+ ports that support transfer rates of up to 10 GBit/s. In addition, with a data throughput of 164 GBit/s on the backplane, it offers full performance even under high load. The multi-gigabit access switch thus forms the high-performance basis for modern network infrastructures in all industries and areas of application.

A high-performance basis for Wi-Fi 6
The LANCOM GS-3528XP with its 12 high-performance 2.5 Gigabit Ethernet ports is the ideal LAN-side basis for integrating the new Wi-Fi 6 WLAN standard into modern infrastructures. The increased data rates when using Wi-Fi 6 require 2.5 Gigabit Ethernet, as the required performance demands exceed those of a simple Gigabit Ethernet port. This switch, in conjunction with the appropriate PoE power, enables the operation of up to 12 Wi-Fi 6 access points or other network components with high performance requirements-without additional electrical installation.

Static routing for fast data exchange
The LANCOM GS-3528XP supports the basic Layer 3 function of static routing and thus the transfer of certain routing tasks from the router to the switch. The predefinition of network routes through one or more network segments enables faster data exchange, especially with high internal data volumes, and reduces the load on the router. Any router capacity that becomes free is then additionally available for handling external data traffic. This increases the efficiency of the entire network.

DHCP server functionality
As a DHCP server, the switch is able to assign IP addresses to clients independently and automatically. The LANCOM GS-3528XP supports this basic Layer 3 function and thus takes over the IP management of the connected network.

Central power supply without additional electrical installation
As a powerful PoE switch, the LANCOM GS-3528XP supplies connected PoE terminal devices without additional power supply units or power cabling. It supports the Power over Ethernet standards IEEE 802.3af and IEEE 802.3at (PoE+). Thanks to its high power reserves with a total output of 370 watts, it is thus ideal for efficiently supplying power to PoE terminal devices with high power requirements.

Configurable access control
The LANCOM GS-3528XP ensures that no unauthorized access to the network is granted to third-party clients. This is made possible by secure access control on all ports in accordance with IEEE 802.1X (port-based, single, multi and MAC-based).

Secure remote management
Thanks to secure communication protocols such as SSH, SSL and SNMPv3, the LANCOM GS-3528XP enables professional remote management of the network. The switch also supports the TACACS+ protocol for authentication, authorization and accounting. An optimal solution that offers maximum security, especially for the management and monitoring of cross-site networks.

SD-LAN - days become minutes
With the LANCOM Management Cloud, the LANCOM GS-3528XP offers fast and easy network integration and automatic configuration assignment - without manual configuration. This makes even complex networking scenarios easy to administer. SD-LAN replaces single device configuration with integrated network orchestration. In addition, automatic VLAN assignment at the desired switch ports is made possible. Configurations can be coordinated across locations and taking into account the network architecture, and at the same time rolled out or updated at the click of a mouse.

IPv6 and IPv4 support
The LANCOM GS-3528XP can be used in pure IPv4, pure IPv6 or mixed networks thanks to its dual stack implementation. Numerous applications such as SSL, SSH, Telnet or TFTP can thus also be executed over IPv6 networks. IPv6 features such as stateless autoconfiguration, neighbor detection and MLD snooping complete the IPv6 features.

For further questions about the article LANCOM GS-3528XP 61850 contact one of our experienced experts via chat, e-mail or telephone to clarify your questions quickly and easily. We are looking forward to your requests!

Technische Daten:
Produktbeschreibung : LANCOM GS-3528XP - Switch - 28 Anschlüsse - managed - an Rack montierbar
Gerätetyp : Switch - 28 Anschlüsse - L3 Lite - managed
Gehäusetyp : An Rack montierbar 1U
Untertyp : 2.5 Gigabit Ethernet
Ports : 12 x 10/100/1000 (PoE+) + 12 x 100/1000/2.5G (PoE+) + 4 x 10 Gigabit SFP+
Power Over Ethernet (PoE) : PoE+
PoE-Budget : 370 W
Leistung : Durchsatz&colon
Markus Blatt

Do you have any questions,
or is there anything we can help you with?

Feel free to contact us +49 2234 2508 50 Free Callback Service Request callback

Any questions?

Leave a message, we love to call you back.

Do you have any questions,
or is there anything we can help you with?

Write us an e-mail Or use our contact form Contact form

Don't hesitate to contact us. Let us know what we can do for you.


Other contact options: